2C primer coating based on epoxy resin for steel, galvanized surfaces, FRP and non-ferrous metals, adheres to all problematic substrates, with corrosion protection, chromate-free, impact and scratch resistant, suitable as a wet-on-wet filler, sanding filler or adhesion promoter, can be recoated with polyester filler after drying for layer thicknesses up to 120 µm, mixing ratio, filler: 2:1 by volume, thinner addition approximately 15-20 %, recoatable after 1 hour, sandable after 12 hours (at +20 °C object temperature), recoatable after 30-40 min. (at +60 °C)
small
medium
iron
steel
zinc
Hazard characteristics
Warning
Hazard notes
H226: Flammable liquid and vapour.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H317: May cause an allergic skin reaction.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
EUH205: Contains epoxy constituents. May produce an allergic reaction.
Safety notes
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P103: Read label before use.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/or shower.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of waste and residues in accordance with local authority requirements.
